|
Item |
Price |
Wt. (kg) |
Qty |
 |
AccuPAR Ceptometer LP-80
Tthe LP-80 makes real-time measurements of Photosynthetically Active Radiation (PAR) that you can save with the push of a button. When
used with the external PAR sensor, the LP-80 makes simultaneous measurements above and below the canopy. Leaf Area Index (LAI) is calculated and displayed with each PAR
measurement. Stored data can be viewed on-screen or downloaded to a computer using the interface cable.
»Download Document |
$3500 |
1.22 Kg |
|
 |
 |
ECHO Probe model EC-20
Measure volumetric water content accurately and economically with ECH2O soil moisture sensors. These soil moisture sensors measure the
dielectric permittivity of the soil to determine volumetric water content. Unlike many soil moisture sensors, the robust ECH2O probes are not sensitive to changes in soil
type and salinity.
»Download Document |
$125 |
0.145 Kg |
|
|
|
ECHO Probe model EC-5
Measure volumetric water content accurately and economically with ECH2O soil moisture sensors. These soil moisture sensors measure the
dielectric permittivity of the soil to determine volumetric water content. Unlike many soil moisture sensors, the robust ECH2O probes are not sensitive to changes in soil
type and salinity.
»Download Document |
$125 |
0.145 Kg |
|
|
 |
EM50 Logger
The Em50 is a 5-channel, self-contained data recorder designed for use with any ECH2O sensor. The sensors are plugged into the 5 channels and measured
as directed by the user. Housed in a weatherproof enclosure with an O-ring seal, the Em50 is ideal for long-term outdoor use. With minimal battery usage, the Em50 can
take readings as often as once per minute for over a year.
»Download Document |
$500 |
0.5 Kg |
|
|
 |
KD-2 Thermal Conductivity/Resistivity Meter
The pocket-sized KD2 measures thermal conductivity and thermal resistivity in just 90 seconds using a single needle
probe. The small needle size results in very little compaction during installation and minimal thermally induced drying around the probe.
»Download Document |
$2875 |
0.613 Kg |
|
|
 |
KD2Pro
Accuracy:
5% Specific Heat
5% Thermal Conductivity/Resistivity
10% Thermal Diffusivity
Calibration:
Each KD2 Pro comes factory calibrated and includes performance verification standards
Range of Measurements:
K: 0.02 to 4 Wm-1 C-1
D: 0.1 to 1.0 mm2s-1
R: 0.25 to 50mC W-1
C: 0.5 to 4 MJ m-3 C-1
* Accuracy and measurement range vary with sensor type.
Measurement Speed: < 5 min
Calibration:
Each KD2 Pro comes factory calibrated and includes performance verification standards
Data Storage: 4,095 readings, flash memory
Compliance to Standards: IEEE Standard 442-1981 and ASTM Standard D5334-08
Operating Environment of Sensors: -50 to 150°C
Battery Source: 4AA
KD2 Pro Controller: Model KD2Pro-C
Auto-Read Mode:
Users can collect unattended data at user-defined intervals in the auto-read mode
Type:
Ultra low-power 16-bit microcontroller w/ 24-bit A/D converter
Display: Liquid Crystal Display (LCD) 7.5 cm x 4 cm
Case Dimensions: 15.5 x 9.5 x 3.5 cm
Accessories:
User's manual
Pelican carrying case
Readout stand
Performance verification standards
Thermal grease
Drill bit for drilling pilot holes in materials
KD2 Pro download utility
RS232 cable
»Download Document |
$6493 |
0.95 Kg |
|
|
 |
Leaf Porometer
Sleek, innovative, pocket-sized instrument that precisely measures stomatal conductance in less than 30 seconds.
»Download Document |
$3000 |
2 Kg |
|
|
 |
Mini-Disk Infiltrometer Model S, Variable suction rates
Decagon's handheld Mini-disk Infiltrometer measures soil hydraulic conductivity quickly and easily in any
soil type. The infiltrometer is constructed of a polycarbonate tube with a semi-permeable stainless steel sintered disk on the bottom. An adjustable steel tube above the
sample chamber regulates the discharge rate.
»Download Document |
$250 |
0.1 Kg |
|
|
 |
Precipitation Gauge for Em50/Em5b
The ECRN-50 is simple self-emptying electronic rain gauges for use with the Em50 and Em5b dataloggers. It is made of durable
plastic that is UV- and water-resistant. Configured as volume gauges, It is useful for measuring the output of irrigation systems in terms of gallons (or liters) per hour.
»Download Document |
$162.5 |
0.241 Kg |
|
|
 |
WP4 Water Potential Meter
The WP4 measures water potential in less than 5 minutes from 0 to –300 MPa with a resolution of 0.1 MPa
Each WP4 is shipped
with:
user manual, cleaning kit, 12 KCl verification standards, 100 sample cups and lids, an RS232 serial cable, and a power cord.
»Download Document |
$5375 |
5.2 Kg |
|
|
|
WP4-T Water Potential Meter
The WP4-T measure water potential in less than 5 minutes from 0 to –300 MPa with a resolution of 0.1 MPa.
Each WP4-T is shipped
with:
user manual, cleaning kit, 12 KCl verification standards, 100 sample cups and lids, an RS232 serial cable, and a power cord.
»Download Document |
$6625 |
5.2 Kg |
|
|
